No votes yet

0 review(s) | Add your review
RØDE’s AI-1 Audio Interface is stacked with incredible technology to ensure recording on your computer is easy, versatile and sounds superb.
  • Power: USB bus-powered
  • Weight: 1lb 3.7oz 560g
  • USB: 1 x USB Type C
$499.00
Brand: Rode
Model: NT1/AIKIT
  • The Rode NT1/AI Complete Studio Kit comes with the AI-1, RØDE’s peerless NT1 large diaphragm condenser microphone, a shock mount and all cables. Let’s get started.

As for inputs: the AI-1’s got both kinds…

  • The AI-1’s single input is a NeutrikTM Combo Jack, which takes both a 3-pole XLR (common to most microphones) and a quarter-inch jack common to most electric instruments like guitar, bass et al. Layering tracks is as easy as plug in, set level and go.

No cords barred (and other puns)

  • The Complete Studio Kit comes with the RØDE NT1 studio condenser microphone, a shock mount, pop-shield [lose standmount], stand-mount, RØDE XLR cable and USB-C/A cables to transfer data from your AI-1 to your computer, and power – including 48V phantom power to your AI-1.

Superior Headphone Amplifier onboard

  • Not only does the AI-1 deliver crystal clear audio to your computer software, but headphones have never sounded sweeter thanks to the discrete studio-quality headphone output and level control.

AI-1 Interface Specifications:

  • Computer Connectivity: USB
  • Form Factor: Desktop
  • Simultaneous I/O: 1 x 2
  • Number of Preamps: 1
  • Phantom Power: Yes
  • Bit Depth: 24-bit
  • Sample Rates: 44.1 kHz 48 kHz 88.2 kHz 96 kHz
  • Analog Inputs: 1 x Neutrik XLR-1/4” combo
  • Analog Outputs: 2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
  • Direct Monitor: Yes
  • USB: 1 x USB Type C
  • Bus Powered: Yes
  • OS Requirements: Mac OS 10.10 or later Windows 7 or later
  • Power: USB bus-powered
  • Depth: 100mm total (with knobs) chassis: 88mm
  • Width: 124mm
  • Height: 38mm
  • Weight: 1lb 3.7oz 560g

Advanced Specifications

INPUT
XLR/MIC INPUT

  • Dynamic Range: 104dBu
  • Equivalent Input Noise @ Maximum Gain (Source Impedance 150 ohms, 20Hz-20kHz, A-weighted): –128dB-A
  • Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
  • Gain Range: 0dB – >45dB
  • Input Impedance: 1.3K Ohms

INSTRUMENT INPUT

  • Dynamic Range: 104dBu
  • Frequency Response (Measured after ADC): 20Hz – 20kHz better than ±1dB
  • Gain Range: 0dB – >45dB
  • Input Impedance: 0.9M Ohms

OUTPUTS
MONITOR OUTPUTS

  • Maximum Output Level: -6dBu
  • Frequency Response: 20Hz – 20kHz better than ±1dB

HEADPHONE

  • Max output power at 1% THD: 32Ohms – >24mW 300Ohms – >245mW

NT1 Microphone Specifications:

  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 1.00"
  • Polar Pattern: Cardioid
  • Address Type: Side
  • Frequency Range: 20Hz - 20kHz
  • Output Impedance: 100Ω
  • Maximum SPL: 132dB SPL (@ 1kHz, 1% THD into 1KΩ load)
  • Maximum Output Level: 8.0dBu (@ 1kHz, 1% THD into 1KΩ load)
  • Sensitivity: -29.0dB re 1 Volt/Pascal (35.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 4dB-A
  • Power Options: +48V phantom power+24V phantom power
  • Weight: 440.00gm
  • Dimensions: 187.00mmH x 50.0
  • Output: XLR Output

What's in the Box

Rode NT1 + AI1 Complete Studio Kit

  • Rode AI-1 Audio Interface
  • Rode NT1 large diaphragm condenser microphone
  • Rode SMR shock mount with popshield
  • 20 foot XLR Cable
  • USB C/A cables

Sales Inquiry

Please complete the form below for your inquiry regarding any product. Our sales team will get back to you soon.