No votes yet

0 review(s) | Add your review
There is no substitute for the deep, visceral excitement powered subwoofers add to multichannel audio, particularly movie soundtracks. But conventional front-firing subwoofer systems can appear boxy and may require special placement within a room for optimum performance.
  • Fast 10-inch (250mm) PolyPlas™ low-frequency transducer
  • 300W RMS amplifier
  • Down-firing transducer
Brand: JBL
Model: Studio 150P
  • By contrast, the JBL® SUB150P houses a 250mm (10"), 300W down-firing transducer in a trapezoidal bass-reflex enclosure that fits just about anywhere.
  • Designed to connect to virtually any A/V receiver and to work with virtually any speakers, the SUB150P will add high-impact, low-distortion bass response to any music or home theatre system, heightening the emotional impact of any listening experience.
  • No multichannel system is complete without a subwoofer, and the SUB150P ensures that no system need go without.
  • Fast 10-inch (250mm) PolyPlas™ low-frequency transducer
  • Stiff cone material delivers tight, high-impact bass for heightened realism and excitement
  • 300W RMS amplifier
  • High-output performance with lower heat generation at all volume levels
  • Digital amplifier circuitry
  • High-efficiency design delivers more power with less heat
  • Bass-reflex enclosure
  • Ported design increases bass output relative to sealed enclosures for greater realism
  • Down-firing transducer
  • Interacts with your floor rather than your walls for cleaner response with fewer unwanted
  • reflections
  • Exclusive JBL Weave Design
  • Distinctive, compact trapezoidal enclosure delivers full-size subwoofer performance with less bulk
  • Key Feat ures
  • • LFE and line-level inputs enable noise-free connections to virtually any A/V receiver
  • • Adjustable crossover frequency lets you optimise performance for use with a variety of speakers
  • • Phase control switch ensures that the subwoofer driver moves in sync for speaker drivers,
  • increasing bass output
  • • Auto power on/off simplifies operation, saves energy
  • Low-frequency transducers: 250mm (10") PolyPlas™ cone
  • Amplifier power: 300 watts RMS, 500 watts peak
  • Frequency response: 27Hz – 150Hz (–3dB)
  • Crossover frequencies: 50Hz – 150Hz (variable), 24dB/octave
  • Enclosure type: Ported
  • Power requirement: 120V, 60Hz (US); 220V – 230V, 50Hz/60Hz (EU)
  • Power consumption: <1W (0.04A @ 230V) standby; 320W (1.8A @ 230V) peak
  • <6W (0.06A @ 120V) standby; 320W (3.2A @ 120V) peak
  • Dimensions (H x W x D): 470mm x 441mm x 441mm (18-1/2" x 17-3/8" x 17-3/8")
  • Weight: 18kg (39.7 lb)